34 Medical Studies Proving Cannabis Cures Cancer

Marijuana alternative cancer treatment

“What we’re seeing is a global revolution that’s going to end this insane prohibition against cannabis in this country. Who in their right mind would outlaw an anti-aging drug that kills cancer cells and uses the same activity that’s found in mother’s milk?”
– Dr. Robert Melamede

Cannabis Cures Cancer - EndAllDisease

There’s still a lot of confusion across the nation about whether or not cannabis is effective for cancer patients.  Odds are you’ve heard something about it but weren’t sure whether the information was reliable or definitive.

So, in order to help clear things up, here is a list of 34 studies showing that marijuana cures cancer, categorized by the type of cancers being cured in each study. As you sort through the articles, note that the consistent theme between them is that cannabis shrinks tumors and selectively targets cancer cells.

As bills and voter initiatives to legalize medical marijuana spread from state to state, remember that we’re not just talking about mitigating the side effects of chemo (though this is another viable use), we’re talking about curing the cancer itself as well as preventing its spread. I’ve taken the liberty of only including articles from credible scientific journals, removing any biased or otherwise improperly cited studies.  Enjoy!

Cannabis Cures Brain Cancer

https://www.nature.com/bjc/journal/v95/n2/abs/6603236a.html
https://www.ncbi.nlm.nih.gov/pubmed/11479216
https://www.jneurosci.org/content/21/17/6475.abstract
https://jpet.aspetjournals.org/content/308/3/838.abstract
https://mct.aacrjournals.org/content/10/1/90.abstract

Cannabis Cures Mouth and Throat Cancer

https://www.ncbi.nlm.nih.gov/pubmed/20516734

Cannabis Cures Breast Cancer

https://www.ncbi.nlm.nih.gov/pubmed/20859676
https://www.ncbi.nlm.nih.gov/pubmed/18025276
https://www.ncbi.nlm.nih.gov/pubmed/21915267
https://jpet.aspetjournals.org/content/early/2006/05/25/jpet.106.105247.full.pdf+html
https://www.molecular-cancer.com/content/9/1/196
https://www.ncbi.nlm.nih.gov/pubmed/22776349
https://www.pnas.org/content/95/14/8375.full.pdf+html

Cannabis Cures Lung Cancer

https://www.ncbi.nlm.nih.gov/pubmed/22198381?dopt=Abstract
https://www.ncbi.nlm.nih.gov/pubmed/21097714?dopt=Abstract
https://www.nature.com/onc/journal/v27/n3/abs/1210641a.html

Cannabis Cures Uterine, Testicular, and Pancreatic Cancers

https://www.cancer.gov/cancertopics/pdq/cam/cannabis/healthprofessional/page4
https://cancerres.aacrjournals.org/content/66/13/6748.abstract

Cannabis Cures Prostate Cancer

https://www.ncbi.nlm.nih.gov/pubmed/12746841?dopt=Abstract
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3339795/?tool=pubmed
https://www.ncbi.nlm.nih.gov/pubmed/22594963

Cannabis Cures Colorectal Cancer

https://www.ncbi.nlm.nih.gov/pubmed/22231745

Cannabis Cures Ovarian Cancer

https://www.aacrmeetingabstracts.org/cgi/content/abstract/2006/1/1084

Cannabis Curse Blood Cancer

https://www.ncbi.nlm.nih.gov/pubmed/12091357
https://www.ncbi.nlm.nih.gov/pubmed/16908594
https://onlinelibrary.wiley.com/doi/10.1002/ijc.23584/abstract
https://molpharm.aspetjournals.org/content/70/5/1612.abstract

Cannabis Cures Skin Cancer

https://www.ncbi.nlm.nih.gov/pubmed/12511587

Cannabis Cures Liver Cancer

https://www.ncbi.nlm.nih.gov/pubmed/21475304

Cannabis Cures Biliary Tract Cancer

https://www.ncbi.nlm.nih.gov/pubmed/19916793

Cannabis Cures Bladder Cancer

https://www.medscape.com/viewarticle/803983 (Sign-up required to view study)

Cannabis Cures Cancer in General

https://www.ncbi.nlm.nih.gov/pubmed/12514108
https://www.ncbi.nlm.nih.gov/pubmed/15313899
https://www.ncbi.nlm.nih.gov/pubmed/15313899

How to Make Rick Simpson Hemp Oil Medicine:

The following is Rick Simpson’s process for making Rick Simpson Hemp Oil, as found on PhoenixTears.ca:

hemp oil - EndAllDisease“I usually work with a pound or more of bud from very potent high quality Indica or Indica dominant Sativa crosses. An ounce of good bud will usually produce 3 to 4 grams of high grade oil and the amount of oil produced will vary from strain to strain. So you are never really sure how much oil you will get, until you have processed the material you are working with. But on average a pound of good bud will usually produce about 60 grams of high grade oil and sometimes you may even get a bit more. Many people will tell you that the oil should be amber and that you can see through it, in many cases the oils that I produced were exactly like that. But the color and texture of the oil you are producing depends a great deal on the strain and solvent that you are using to produce the oil. So don’t be concerned if the oil you produce happens to be darker in color, this does not mean that it is any less potent as a medicine.

The process that I am about to describe involves washing the starting material twice with a good solvent such as pure naphtha, to remove the available resin from the plant material. Naphtha has proven to be a very good solvent to produce the oil and in Europe it is often called benzine. The only solvents that I have direct experience with are ether, alcohol and naphtha. Ether is my personal favourite and it is a very effective solvent, but it is expensive and can be quite hard to get. I think the use of ether is better suited for closed distilling devices since it is very volatile and its fumes make it a bit dangerous to work with. Alcohol is not quite as effective as ether or naphtha as a solvent, since it is less selective in nature, but still it does work well. Alcohol will dissolve more chlorophyll from the starting material and due to this, oils produced with alcohol will usually be more noticeably dark in color. For a solvent to be effective it should be 100% pure and 100% pure alcohol is expensive and can be quite hard to find. Naphtha on the other hand is quite cheap to acquire and is usually not too hard to find. Many paint suppliers sell pure naphtha as paint thinners, so for the most part it is quite easy to get and next to the use of ether it is my solvent of choice.

All these solvents including alcohol are poisonous in nature, but if you follow these instructions solvent residue in the finished oil is not a concern. When you are done processing the oil after it cools to room temperature, it is a thick grease rather than an oil. The finished oil or in reality (grease) is about as anti poisonous as you can get. Even if there was a trace amount of solvent residue remaining, the oil itself would act upon it to neutralize any harmful poisonous effect. I don’t recommend the use of butane as a solvent to produce this medication, since it is very volatile and would require the use of expensive equipment to neutralize the danger. Also using butane to produce the oil does not decarboxylate the finished product, so oils produced in this manner would be much less effective for medicinal use.

The starting material must be as dry as possible, it is then placed in a container of good depth to prevent the oil solvent mix from splashing out during the washing process. Once the starting material is placed in the desired container it is then dampened with the solvent being used, be sure the area you are working in is well ventilated and there are no sparks, open flames or red hot elements in the area. After the material is dampened it is crushed using a length of wood such as a piece of 2×2, after it has been crushed add more solvent until the material is completely immersed, in the solvent. Work the material immersed in the solvent for about three minutes, with the length of wood you used to crush it with. Then slowly pour the solvent oil mix off into another clean container, leaving the starting material in the original container, so it can be washed for the second time.

Again add fresh solvent to the starting material until it is once more immersed in the solvent then work it for three more minutes with the length of wood you have been using. Then pour the solvent oil mix into the same container that is holding the solvent oil mix from the first wash you did. Trying to do a third wash on the plant material would produce very little oil and it would be of little or no benefit as a medicine. The first wash dissolves 70 to 80% of the available resin off the starting material, the second wash then removes whatever resin that is of benefit that remains.

Use something such as clean water containers with a small opening at the top and insert funnels into the openings, then put large coffee filters in the funnels. Pour the solvent oil mix from the first and second washes into the coffee filters and allow the solvent oil mix to drain through the filters to remove any unwanted plant material. Once the solvent oil mix has been filtered it is now ready to have the solvent boiled off.

Use an inexpensive large rice cooker with an open top that has both high and low heat settings to boil the solvent off the oil. Make sure that the rice cooker is set up in a well ventilated area and place a fan near by to blow away the fumes as the solvent boils off. Rice cookers are designed to not burn the rice as it cooks and the temperature sensors that are built in, will automatically put the cooker back on the low heat setting if the temperature within the cooker begins to get to high. When producing oil if the temperature gets too high it will vaporize the cannabinoids off the oil and of course you do not want this to occur. That’s the reason I strongly recommend the use of a rice cooker to those who have never produced oil before since it eliminates any danger of this happening, if the rice cooker is working properly.

Make sure there are no sparks, open flames or red hot elements in the area while you are filling the rice cooker or boiling the solvent off, because the fumes produced from the solvent are very flammable. I have used this same process thousands of times and have never had a mishap, but for your own safety please follow the instructions, I also caution you to avoid breathing in the fumes that solvents produce. Fill the rice cooker until it is about three quarters full, this allows room for the solvent oil mix to boil the solvent off without spilling over. Put the rice cooker on its high heat setting and begin boiling the solvent off, as the level in the rice cooker drops continue to carefully add the solvent oil mix you have remaining, until you have nothing left.

When the level in the rice cooker comes down for the last time and has been reduced to about two inches of solvent oil mix remaining, add a few drops of water to the solvent oil mix that remains. When I am boiling the solvent oil mix produced from one pound of starting material, I usually add 10 to 12 drops of water at this time. This small amount of water allows the remaining solvent to boil off the oil that remains in the cooker more readily. When there is very little remaining in the cooker, I usually put on a pair of gloves and then pick up the cooker and begin swirling its contents. Until the cooker automatically kicks off its high heat setting and then goes to low heat.

As the last of the solvent is being boiled off, you will hear a crackling sound from the oil that is left in the cooker and you will see quite a bit of bubbling taking place in the oil that remains. Also you will notice what looks like a small amount of smoke or steam, coming off the oil in the rice cooker. But don’t be concerned this is mostly just steam produced from the few drops of water that you added. After the rice cooker has automatically switched to its low heat setting, I take the inner pot out of the cooker and pour its contents into a stainless steel measuring cup. There will be a small amount of oil remaining in the pot that you will find almost impossible to get out, unless you use something like dry bread to absorb the oil while it is still warm. Then small amounts of this bread can be eaten as a medicine, but remember it can sometimes take an hour or more before you feel its effects. So be careful how much bread like this you consume, because it may put you to sleep for quite a few hours, just the same as the raw oil will do itself.

Take the oil that you poured into the stainless steel measuring cup and put it on a gentle heating device such as a coffee warmer, to evaporate off whatever water remains in the oil. Quite often it only takes a short time to evaporate the remaining water off, but also some strains produce more natural turpins than others. These turpins can cause the oil you now have on the coffee warmer to bubble for quite some time and it may take awhile for such oils to cease this activity. When the oil on the coffee warmer has stopped bubbling and there is little or no activity visible, take the oil off the coffee warmer and allow it to cool a bit.

Then using plastic applicators or syringes with no needles, that are available in your local drug store. Use the plunger of the syringes to slowly draw the warm oil up into the syringes and allow it to cool. In a short time the oil will become a thick grease, sometimes the oil can be so thick that it can be hard to force it out of the syringes when cooled. If such a thing happens simply run hot water over the syringe and your doses can then be forced out much more easily. Sometimes a patient will force out too much oil, but if this happens just pull back on the plunger of the syringe and the excess oil can usually be drawn back into the syringe without too much difficulty.

On average if I have a dry pound of material to work with, it will require about two imperial gallons of solvent, or 9 liters which equals about 320 fluid ounces to do the two washes that are required. If you plan to produce the oil from more or less starting material, simply do the math to determine roughly how much solvent you will require. From start to finish it usually takes me about four hours to accomplish the whole process, then the medicine is sitting there ready to be used. It should also be mentioned that this oil has an extremely long shelf life, if kept in a cool dark place for storage. I think these instructions should make producing this oil quite easy for anyone, but before you start make sure that you have everything you will need to do it properly.

At first it may seem daunting for some to try to produce their own medicine, but in reality this process is extremely simple. All you have to do is carefully follow the instructions and after you produce this medication a couple of times, you will find that it is not much harder to make than a cup of coffee. Once you have produced your own medication it takes all the mystery out of medicine and you no longer have to rely on doctors in most cases, for now you are your own doctor. Welcome to the world of real medicine, medicine that does no harm and is effective for practically all diseases and conditions and a wonderful natural medication that you now know how to produce yourself.

Best Wishes and Good Health,
Rick Simpson”

Watch ‘Run From The Cure’ Documentary on Hemp Oil:

Learn More with Books about Cannabis:

Marijuana Gateway to Health: How Cannabis Protects Us from Cancer and Alzheimer’s Disease

The Benefits of Marijuana

Why Marijuana Should Be Legal

Sources:
https://phoenixtears.ca/make-the-medicine/
https://www.wakingtimes.com/2013/07/27/34-medical-studies-proving-cannabis-cures-cancer/

Disclaimer: Although this is posted under a section called ‘Cancer Cures’, we at EndAllDisease.com do not claim that anything in that section cures cancer. That would be illegal. Instead, we believe that there isn’t, and never will be a one-stop ‘cure’ to cancer or other diseases, and that eliminating disease requires many changes including diet, exercise, switching to healthy personal care products, and other lifestyle changes. We do how believe in the power of medicine to help aid and assist in the body’s natural healing process, so we provide this and other powerful medicinal remedies to give you options, other than letting your doctor poison you with conventional treatments.